100ltr Electric Deluxe Microbrewery Home Brew Set-Up with Wort Pump & 40 Plate Heat Exchanger               

FREE UK MAINLAND DELIVERY

Each tank in this 100ltr deluxe no-burner microbrewery is 98ltr and 50cm x 50cm in internal diameter.

HLT

The HLT tank is 316 stainless steel and comes complete with two handles and also a handled lid.  This HLT includes one strong durable food-grade polycarbonate sight glass which goes from 20-to-90 ltr.  They connect to the tanks with a quick connect stainless steel elbow and can easily removed for cleaning. This HLT comes with a stainless steel temperature gauge, which ranges from -10-to-100 celsius / 0-to-220 fahrenheit.  In addition, each gauge has a 13.5cm stainless steel probe and glass front.  This HLT has a 1/2″ stainless steel 3-piece tap, and comes complete with cam-locks to easily connect hoses. The HLT has 2x 32mm holes punched for fitting of 3kw ripple heating elements supplied these will need wiring by a qualified electrician no wires supplied.

Mash tun

The mash tun comes with double-insulated foil bubble wrap to maintain mash temperatures.  This mash tun has a stainless steel temperature gauge which ranges from -10-to-100 Celsius / 0-to-220 Fahrenheit.  In addition, each gauge has a 13.5cm probe with a screw for calibrating.  It’s complete with false bottom that sits above the tap and seals against the side of the pot which can easily be removed for cleaning.  This mash tun also comes complete with insulated lid and is fitted with a 1/2″ stainless steel 3-piece tap with cam-locks for quick release.

The Kettle/copper

The kettle is 316 stainless steel and comes complete with two handles and also a handled lid.  This kettle includes one strong durable food-grade poly carbonate sight glass which goes from 20-to-90 ltr.  They connect to the tanks with a quick connect stainless steel elbow and can easily removed for cleaning. This kettle comes with a stainless steel temperature gauge, which ranges from -10-to-100 Celsius / 0-to-220 Fahrenheit.  In addition, each gauge has a 13.5cm stainless steel probe and glass front.  This kettle has a 1/2″ stainless steel 3-piece tap, and comes complete with cam-locks to easily connect hoses. The kettle also has a 12″ stainless steel fine mesh hop filter fitted to the back of the tap which can be easily removed for cleaning. The HLT has 2x 32mm holes punched for fitting of 3kw ripple heating elements supplied these will need wiring by a qualified electrician no wires supplied.

Heat Exchange 40 Plate 165kw

The heat exchange 40 plate 165kw works for very fast chilling of wort.  This heat exchange is fitted with 1/2″ stainless steel hose fittings for the cold water in and out and 2 x cam-lock F and 2 x cam-lock C for the wort in and wort out. 

Stainless Steel Pump

This stainless steel pump will run with liquid temperatures up to 95 degrees Celsius. The pump also has 1/2″ hose barbs for the inlet and outlet. It is reversible via a rocker switch at the rear and comes with 1.5m of cable.

This brewery also comes with:

• 1x Stainless steel mash paddle
• 4x 3kw L.W.D Ripple heating elements 13 Amp each ready to be fitted into the tanks simply put through the hole already punched on the HLT and Kettle and tighten the internal nut (no wires supplied) will need wiring by a qualified electrician .
• 5 meters of food grade non toxic hose
• In total this brewery comes with 5x cam-lock C for quick connect to cam-lock F and 5x cam-lock F

Please note that our breweries have a 14 working day lead time for delivery however during peak times this may vary.

Also Note elements are supplied separate and will need fitting in the tanks on arrival. They don’t come with wiring and will need wiring by a qualified electrician. Please also note that the elements are 3kw each and are 13 amp each so please make sure you have an adequate ring main on your consumer unit.

Do not hesitate to contact us for information about this product.

(note that this 100ltr deluxe no-burner microbrewery does not include any stand)